Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hillsboro, OR
We’re a gate company in Hillsboro, OR, and gates are all we do. That matters more here than in most towns, because a Hillsboro gate lives a hard life: forty-plus inches of rain a year, clay soil that swells and heaves posts, and a mix of century-old downtown properties and brand-new subdivisions that each fail in their own way. New gate installation is the job we’re asked about most, though plenty of calls come from gates that simply stopped working. Whether your operator is a Mighty Mule on a backyard driveway or a FAAC on a commercial entrance, we’ll diagnose it and give you a written price before anything starts. Call (855) 251-3899 – we answer 24/7, with fast dispatch from 7am to 7pm.
Why Hillsboro Homes Are Different
Hillsboro sits between two very different gate worlds. Near the historic downtown core, wrought-iron and wood gates hang on century-old lots with original posts, and those are usually the ones a technician can’t open after a week of rain. Out in Reed’s Crossing and South Hillsboro, you’re looking at vinyl and aluminum gates bolted to 1990s-to-2020s builder-grade fences, and those sag on settling soils while they’re still new. The clay under both areas holds water through the wet months, so wood swells, hinges bind, and metal hardware corrodes; then the summer dry spell shrinks and warps the same wood back the other way. That cycle makes post stabilization and hinge realignment a year-round staple here, not a seasonal fix. It all changes what a gate actually needs in Hillsboro, and it’s why we look at the soil and the posts before we look at the operator.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Hillsboro Services
Hillsboro homeowners and property managers call us about two things most often: gates that have stopped opening and gates that are ready to be replaced or built new.
Gate Repair in Hillsboro
Sagging hinges, swollen wood, and posts that have walked out of alignment with the clay are the bulk of what we see on Hillsboro gates. Older downtown properties often need a gate planed and rehung each spring once the wet winter has had its way. Newer subdivisions in Reed’s Crossing bring builder-grade gates with hardware that’s loosened on settling ground. We sort out the mechanical side first – posts, hinges, tracks, latches, welds – because an operator can’t fix a gate that binds. For that side of the work, see Gate Repair in Hillsboro.
Electric Gate Repair in Hillsboro
An automated gate that stops mid-travel, reverses on nothing, or ignores the remote is usually an operator or control problem, not a hinge problem. Our technicians with up to 8 years of experience work on control boards, loop detectors, safety reversals, and the power side of systems from LiftMaster to BFT. Hillsboro’s wet months are hard on exterior enclosures and wiring, so moisture faults show up here more than you’d expect. We test the whole cycle, not just the part that failed. Details are on Electric Gate Repair in Hillsboro.
Gate Installation in Hillsboro
Gate installation in Hillsboro has to account for soil that moves and a wet season that punishes anything set shallow. On a 1990s-to-2020s subdivision lot in South Hillsboro, that means footing depth and drainage matter as much as the gate itself; on an older downtown lot, it means working with the existing fence line and the clay that’s already there. We handle driveway, sliding, and automatic gates for both residential driveways and commercial access points, and we measure on site so the quote reflects your actual entrance – we’re looking at Gates are all we do, so a swing or slide gets set right the first time rather than patched afterward. Brand-specific fluency helps here too: whether your system is a Mighty Mule, a LiftMaster, or a commercial-grade FAAC, we spec the gate and the operator together. Everything orders, arrives, and gets scheduled; this is measured work, not same-day work, and the written price comes first. Full detail is on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of opening the gate by hand every trip, or you have a manual gate that’s too heavy or too far from the car to manage comfortably.
What it costs in Hillsboro
Automatic gate installation in Hillsboro typically runs $2,500 to $6,500, depending on the operator class and whether a power run and safety edges have to be added.
How we do it
We measure the opening, set or verify the posts and footing depth, mount the operator and arms, run the power and control wiring, install the safety reversal devices, then cycle-test the whole system before we leave.
Driveway Gate Installation
Signs you need it
Your driveway is open to the street, the existing gate has rusted out or never fit the entrance properly, or a new fence line has left you without a working driveway gate.
What it costs in Hillsboro
Driveway gate installation in Hillsboro is typically estimated at $1,800 to $5,500 for the gate and hang, with heavier swing gates and custom widths at the top of that range.
How we do it
We lay out the swing and clearance first, dig and set posts to proper footing depth in the clay, hang and level the gate, then fit the latches and stops and check that it clears the ground through its full travel.
What Gate Installation Costs in Hillsboro
These are typical ranges for Hillsboro, and the written estimate sets the final price. We quote before any work starts.
| Item | Typical range in Hillsboro |
|---|---|
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $2,200 – $6,000 |
| Automatic gate installation (operator included) | $2,500 – $6,500 |
Do I need a permit to install a gate in Hillsboro?
Most cities require a permit when a gate involves new electrical work, and Hillsboro is no different, so ask the city’s building department before the power run goes in. We’ll tell you what the job involves so you know what to ask.
How long does a new gate take from estimate to installed?
A new gate is measured and priced on site, then ordered and scheduled. Typical installations run a few weeks from approval depending on the gate and operator, and Hillsboro’s wet season can shift the install window. Call (855) 251-3899 for a free estimate.
Brands We Service in Hillsboro
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we diagnose each brand on its own terms rather than swapping parts to see what sticks. Turnaround is quick because the diagnosis is specific. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hillsboro, OR
| Service | Typical range in Hillsboro |
|---|---|
| Gate repair (hinges, posts, latches, alignment) | $150 – $450 |
| Electric gate repair (operator, control board, safety devices) | $200 – $650 |
| Post stabilization or replacement | $250 – $800 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $2,200 – $6,000 |
| Automatic gate installation (operator included) | $2,500 – $6,500 |
In Hillsboro, price climbs with post conditions – a gate set in clay that’s heaved needs more footing work – and with the operator class, since commercial-grade systems cost more than residential ones. Whatever the job, the price is quoted and agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Hillsboro
We cover Hillsboro from the historic downtown core out through the newer subdivisions, and the response note is the same across the city: we answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. When a gate fails, call and we’ll book the visit for the next opening.
- Downtown Hillsboro
- South Hillsboro
- Reed’s Crossing
- Orenco
- Witch Hazel
Service Area – Cities Near Hillsboro
We also serve the towns around Hillsboro, and the same clay and wet-winter conditions follow us out there. If you’re just outside the city line, call and we’ll confirm coverage. We work in Cornelius, OR, Aloha, OR, Forest Grove, OR, and Sherwood, OR, plus the neighborhoods in between.
Serving Hillsboro, OR – Our Local Coverage Area
We serve Hillsboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hillsboro
We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday, so most Hillsboro calls get a same-day visit when you reach us during dispatch hours. A call outside those hours is booked into the next opening. Call (855) 251-3899.
Often yes on both counts. New electrical work for an operator usually needs a city permit, and many Hillsboro subdivisions have HOA rules on gate style, height, and color. Check with the city and your HOA before ordering, and we’ll work to what’s approved.
All of Hillsboro, from downtown and Orenco to South Hillsboro and Reed’s Crossing, plus the surrounding cities. If you’re unsure whether your address is in range, call (855) 251-3899 and we’ll confirm before booking.
Whether your gate needs a repair, a new operator, or a full installation, call (855) 251-3899 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 8 years of experience, and we’ll give you a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Hillsboro Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Amanda Bennett"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Jennifer Gallagher"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Scott Miller