Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Portland, OR
Portland’s gate work has its own weather, and gate installation here has to be planned for both ends of it: months of rain that swell wood and pull posts loose, then dry summer weeks that crack and warp the same materials. In neighborhoods where the housing dates back a century, a new gate also has to fit a narrow side yard and an existing post line, not a builder’s drawing. We’re a gate-specialist company – repair, electric gate work and new installation – and that focus is why we can walk a Portland driveway and tell you what will still be standing straight after the next wet season. Call (855) 251-3899 to set up a free estimate.
Why Portland Homes Are Different
Portland is one of those cities where the fence line tells you the decade. In inner southeast and northeast, the streets are lined with Craftsman bungalows and foursquares from the 1900s through the 1930s, most with a narrow side yard, an original wood fence, and a single-car driveway gate. Those gates were hung on wood posts, and those posts have been quietly rotting at the grade line for years – often unnoticed because the top of the post still looks sound.
The climate does the rest. Our long wet season and the moss that comes with it keep wood gates swollen for months. Occasional ice storms and high-wind events rust exposed steel hardware and pull saturated posts right out of the ground. Then summer arrives and dries out and warps the same wood. A repair that looks finished in August has to be tested by December.
There’s a distinctive pattern here worth knowing: in Portland’s older inner-east neighborhoods, the gate post is frequently sitting in soil soaked by a leaking or under-drained downspout. That’s why our first check on a sagging gate is drainage and rot at the post base. Rehang the gate without fixing the water and it sags again by the next wet season. Older driveways also bring tight clearances, so we measure swing paths before assuming a standard kit will fit.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Portland Services
Most of the calls we take in Portland come down to two things: a gate that’s failing and needs to be repaired, or a gate that’s supposed to open on its own and doesn’t.
Gate Repair in Portland
Manual gate repair in Portland is usually a structural question before it’s a hardware one. Sagging is the most common symptom, and in older neighborhoods it almost always traces back to the post rather than the hinge. We check the base, the footing and the drainage feeding it, then rehang or reset what’s actually failing. Warped wood panels, rusted latches, gates that drag on a saturated slab, gates that won’t swing evenly after an ice storm – those are routine. Gates are all we do, which means nobody on the job is learning gate mechanics on your driveway. For the full scope of what we handle, see gate repair.
Electric Gate Repair in Portland
Automated gates fail in ways manual gates never do: a control board that stops responding, a safety reversal that fires on nothing, a loop detector that won’t clear, or an operator that runs a few inches and quits. Diagnosing that takes someone who reads the operator, not someone who swaps parts until something works. We specialize in electric and automated systems, including logic boards and safety devices, and we’re experienced with the residential and commercial units that show up on Portland properties. Electrical work at the operator carries real shock and entrapment risk, so it belongs to a trained technician. Details on our electric gate repair work are on its own page.
Gate Installation in Portland
New gate installation in Portland starts with the ground, not the gate. In the inner-east ZIPs, a lot of driveway gates are being replaced on lines that were set decades ago – posts in soil that has been wet and dry for a hundred seasons, drainage that was never corrected after the neighbors regraded. Whether you’re replacing a collapsed wood picket gate behind a 1920s bungalow in 97212 or adding a first automated entry to a mid-century house, the plan has to account for both the wet season and the dry one. Our Gate Installation work covers the whole job: measuring the opening, setting posts to proper footing depth, hanging the leaf or slide, and wiring the operator. We handle driveway, sliding, swing and automatic systems, and we handle them for homeowners and property managers alike.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rotted through at the bottom rail or has dropped so far out of square that patching it no longer buys another season.
What it costs in Portland
Driveway gate installation typically runs from about $1,800 to $4,500 depending on width, material and whether an operator is part of the job.
How we do it
We measure the opening and swing clearance, set new posts to proper footing depth with the drainage addressed, build or hang the gate to fit, then align the hardware and check the swing before we leave.
Electric Gate Installation
Signs you need it
You want the gate to open without leaving the car, or an aging operator has reached the point where repair costs more than a clean replacement.
What it costs in Portland
Electric gate installation is typically estimated at about $3,200 to $8,000, with the operator, power run and safety devices driving most of the range.
How we do it
We confirm the power source and routing, mount the operator for the gate’s weight and travel, set the safety edges and reversal behavior, and test every cycle before handing over the controls.
What Gate Installation Costs in Portland
Every installation is quoted from a written estimate after we’ve seen the opening, the soil and the power situation. These are typical ranges for the Portland market.
| Item | Typical range in Portland |
|---|---|
| Driveway gate installation | $1,800 – $4,500 |
| Electric gate installation | $3,200 – $8,000 |
| Sliding gate installation | $2,600 – $6,500 |
Do I need a permit to install a gate in Portland?
Often yes, especially when the gate is tall, close to a property line or paired with an operator and electrical work. Ask the city’s building department before ordering materials, and check any HOA rules on height and setbacks. We’re glad to talk through what your specific plan involves.
Can you install a gate on a slope or a narrow side yard?
Yes. Narrow clearances and uneven ground are standard in Portland’s older neighborhoods, and they’re a reason to measure carefully rather than order a stock kit. We’ll look at the swing path, the grade and the post locations on the estimate visit.
Brands We Service in Portland
We’re experienced across nine major gate brands, from residential units like Ghost Controls, Mighty Mule and Viking to commercial-grade operators such as DoorKing, FAAC and BFT. Brand fluency means faster diagnosis and fewer guessed parts. We don’t claim stocked inventory; parts are sourced for the job. You can see the full range on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Portland, OR
The figures below are typical estimated ranges for Portland. Your written estimate sets the final price, and we quote and agree it before any work starts.
| Service | Typical range in Portland |
|---|---|
| Manual gate repair | $150 – $450 |
| Gate post reset or replacement | $250 – $700 |
| Hinge and latch replacement | $120 – $350 |
| Gate realignment and sag correction | $180 – $500 |
| Electric gate operator repair | $250 – $800 |
| Control board replacement | $350 – $900 |
| Safety edge and reversal repair | $200 – $550 |
| Loop detector repair | $300 – $750 |
| Driveway gate installation | $1,800 – $4,500 |
| Electric gate installation | $3,200 – $8,000 |
| Sliding gate installation | $2,600 – $6,500 |
What pushes a Portland job toward the higher end is usually the ground: rotted posts that need resetting to proper footing depth, drainage that has to be corrected before a gate will stay straight, or a property where the power run to an operator is longer than expected. Recent ice storms and wind events also leave more hardware to replace than a routine sag would. Whatever the job turns out to involve, you’ll see the number in writing and agree to it before we start. Estimates are free.
Neighborhoods We Serve in Portland
We work across Portland and the surrounding metro. Response is the same across the city: we answer 24/7, and fast dispatch from 7am to 7pm on the days we send technicians. If a gate fails on a Saturday, call and we’ll book it into the next opening. ZIP 97201 and the inner-east neighborhoods are frequent stops.
- Irvington and the inner northeast, near 97212 and 97232
- Laurelhurst and Mount Tabor
- Sellwood-Moreland and Westmoreland
- Alameda and Beaumont-Wilshire
- Downtown and the South Waterfront
Service Area – Cities Near Portland
Portland sits in the middle of our service area, and we cover the communities around it. If you’re just outside the city line, you’re likely still inside our range. We regularly work in Aloha, OR, Hillsboro, OR, Sherwood, OR and Wilsonville, OR, and the same wet-season conditions that shape gate work in Portland apply across all of them. Call and we’ll confirm coverage for your address.
Serving Portland, OR – Our Local Coverage Area
We serve Portland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Portland
We answer 24/7 and offer same-day service where the schedule allows, with fast dispatch from 7am to 7pm on the days we send technicians. A call outside those hours is booked into the next opening. Repair visits are usually quick to arrange; installations are measured and scheduled.
Yes. We work on residential driveways and on commercial access-control systems, including entry-level operators and commercial-grade units. That range means the same team can diagnose a homeowner’s swing gate or a property manager’s busy sliding entry without bringing in a second contractor.
We do. Portland is the center of our coverage, and we work throughout the surrounding metro, including the cities listed above. If you’re unsure whether your address falls inside the area, call (855) 251-3899 and we’ll tell you straight.
No. We quote and agree the price before any work begins, and the written estimate sets the final number. If we find something hidden, like a rotten post base or a failed control board, we’ll talk it through with you before doing anything that changes the scope.
Whether your gate needs a new post, an operator diagnosed or a fresh install planned, the fastest way to a straight answer is a phone call. Reach us at (855) 251-3899 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 8 years of experience.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Portland Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Andres Morales"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Dustin Ackerman"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Steve Walsh