Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Hillsboro?
A new driveway gate installed in Hillsboro typically costs between $3,200 and $6,800 for a single-swing manual gate, and $5,500 to $12,000 for an automated single-leaf swing gate with an operator, sensors, and wiring. Double-driveway automated systems usually land between $9,000 and $18,000 depending on span, material, and operator class. Those ranges assume a straightforward installation on level ground with power reasonably close; a hillside lot in the West Hills or a long rural driveway off Gordon Road will move the number.
We give free on-site estimates and put the final price in writing before any work begins. Call (855) 251-3899 to schedule one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most automated single-swing gate installs in Hillsboro run $5,500 to $12,000.
- Manual swing gates are the lowest-cost option at roughly $3,200 to $6,800 installed.
- Sliding gates cost more than swings because of track, footing, and clearance work.
- Operator brand drives price: an entry-level Mighty Mule or Ghost Controls unit sits well below a commercial FAAC or DoorKing operator.
- Permits, power runs, and site grading are the three biggest variables that push a quote up.
- Our technicians have up to 8 years of experience, and gates are all we do.
Gate Installation Cost Breakdown (2026)
The ranges below reflect what a gate installation runs in the Hillsboro market in 2026. They’re typical estimates for a standard residential install, not exact quotes. The written estimate from your on-site visit is what sets the final price.
| Line item | Typical cost |
|---|---|
| Manual single-swing gate (gate, posts, hardware, install) | $3,200 – $6,800 |
| Manual double-swing gate | $5,800 – $10,500 |
| Sliding gate (manual, track and footing) | $5,000 – $11,000 |
| Automated single-swing, standard operator | $5,500 – $12,000 |
| Automated double-swing, dual operators | $9,000 – $18,000 |
| Automated sliding gate with operator | $8,500 – $17,000 |
| Gate operator only (entry-level residential, installed) | $1,600 – $3,200 |
| Gate operator only (commercial-grade, installed) | $3,500 – $8,500 |
| Safety sensors, loop detectors, and photo eyes | $350 – $1,200 |
| Keypad, intercom, or remote access controls | $250 – $1,500 |
| Electrical trenching and power run to gate location | $600 – $3,500 |
| Permit and inspection fees | $150 – $600 |
| Old gate removal and haul-away | $200 – $750 |
What pushes a quote toward the top of a range: a wider opening, a heavier gate material like steel or solid cedar, a commercial-grade operator, and a site that needs grading or a new concrete pad at the gate post. Automation is the single biggest jump. Adding an operator to a manual gate roughly doubles the total, and the safety devices that come with a powered gate (reversing sensors, loop detectors, photo eyes) add several hundred dollars on their own. Those aren’t optional. A powered gate without working reversal detection is an injury waiting to happen, and that’s the reason we quote them on every automated install.
The type of gate matters as much as the brand. A manual swing gate on flat ground is the simplest, cheapest job. A sliding gate needs a level run and a track set on proper footing depth, which adds concrete and site work. Where a driveway climbs a slope, expect more grading and heavier posts.
What Affects Gate Installation Pricing in Hillsboro
Every quote we write comes down to these factors. Understanding them up front makes the estimate easier to read.
- Gate material and span. An aluminum or cedar swing gate costs less installed than steel or a wide double-leaf. The heavier the gate, the beefier the posts, hinges, and operator need to be. A 12-foot cedar single-swing at an entry off Jackson School Road prices very differently from an 18-foot steel double-swing.
- Operator brand and class. Entry-level residential operators like Mighty Mule and Ghost Controls keep the automation cost down. A commercial-grade FAAC, BFT, or DoorKing operator adds capability and price. We service nine major brands, so we’ll quote the operator that actually fits your gate weight, duty cycle, and access needs rather than what’s on the shelf.
- Power and trenching. If your gate location has power close by, the run is short. If the driveway is long or the panel is far from the gate, trenching and conduit add real cost. Where power isn’t practical, a solar-capable operator can be an option, though battery and panel cost can offset the savings on trenching.
- Site conditions. Slope, soil, drainage, and whether the gate needs a new concrete anchor pad all change the number. Hillsboro’s wet winters are hard on posts set too shallow, so we set them to proper footing depth every time.
- Safety and access devices. Reversing sensors, loop detectors, photo eyes, keypads, intercoms, and remote controls are priced individually. A gate that controls a business entrance needs more of them than a home driveway.
- Permits and inspection. Most cities require a permit for a new gate and its electrical work, and the building department will tell you what applies. We flag permit needs in the estimate so there are no surprises.
For more on how we approach the work and the kinds of gates we handle, see the overview of our gate repair Hillsboro services.
How to Save on Gate Installation
You don’t have to spend the top of the range. A few decisions move the number down without cutting corners on safety.
- Get the estimate before you pick the gate. A free on-site estimate lets us flag the real cost drivers – power distance, slope, footing – before you commit to a design. Call (855) 251-3899 and we’ll come out and price it.
- Choose the right operator for the gate, not the biggest one. Overbuying on a commercial operator for a home driveway is money you won’t get back. We match the operator to the gate weight and how often it cycles.
- Keep the power run in mind when you site the gate. If there’s flexibility in where the gate sits, a location closer to your existing power can cut trenching cost meaningfully.
- Skip the maintenance contract mentality. Gates simply need to be set up right the first time and checked occasionally. We price work per job – no plans or subscriptions to sign up for.
- Ask about a repair-versus-replace comparison if you have an existing gate. Sometimes a working operator and gate posts can be reused with a new gate leaf. An estimate will show you whether that saves money or costs more in the long run.
We serve homeowners and property managers across Hillsboro and the surrounding area, and because gates are all we do, the estimate is built by someone who works on them every day.
What Does It Cost to Automate an Existing Manual Gate?
Automating an existing manual swing gate in Hillsboro typically costs $1,600 to $5,000 installed, depending on operator brand, gate weight, and whether power is already at the gate. If the posts and hinges are solid, you keep the gate and add the operator, sensors, and controls. If the gate is too light, too heavy, or the posts aren’t up to a powered install, the quote reflects any reinforcement.
This is where brand-specific knowledge pays off. Whether your system is a LiftMaster, Linear, Viking, or Elite unit, or you’re starting from a manual gate and want a new operator, we diagnose the right fit rather than guessing. Adding safety devices is part of every automated install – a powered gate needs working reversal detection. Call (855) 251-3899 for a free estimate on automating what you have.
Is It Cheaper to Repair or Replace a Gate?
Repair is usually cheaper than replacement when the gate frame and posts are sound – a hinge, latch, or operator fix typically runs $180 to $900, while a full replacement starts at $3,200. Replace when the posts are failing, the frame is bent or rusted through, or the gate is undersized for the opening. Our technicians will tell you straight which one makes sense after they look at it.
If your existing gate is automated and the operator is the weak point rather than the gate itself, electric gate repair is often the lower-cost path. We handle control boards, operators, loop detectors, safety reversals, and the wiring that ties them together, so there’s no handoff to a second contractor. Call (855) 251-3899 – estimates are free.
FAQs – Gate Installation Cost
How much does a driveway gate cost in Hillsboro?
A driveway gate in Hillsboro typically costs $3,200 to $6,800 for a manual single-swing installed, and $5,500 to $12,000 for an automated single-swing with operator and safety devices. Double gates and sliding gates run higher. Call (855) 251-3899 for an exact quote – estimates are free.
Can you install a new gate the same day?
Same-day installation is possible on straightforward manual gate jobs when the site is ready, and most automated installs are scheduled once power and permits are sorted. Call (855) 251-3899 and we’ll tell you what’s realistic for your driveway. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Do I need a permit to install a gate in Hillsboro?
Most cities require a permit for a new gate and any electrical work tied to it, and the fees usually run $150 to $600. Ask your city’s building department what applies to your property, and we’ll note permit needs in the estimate. Call (855) 251-3899 with questions.
What brands of gate operators do you work with?
We service nine major gate brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – covering both entry-level residential systems and commercial-grade operators. Whether your system is a FAAC or a Mighty Mule, we know it. Call (855) 251-3899 to talk through your install.
How much does a sliding gate cost to install in Hillsboro?
A sliding gate in Hillsboro typically costs $5,000 to $11,000 manual and $8,500 to $17,000 automated, because of the track, footing, and clearance work involved. Call (855) 251-3899 for a free estimate on your specific run.
Can you handle commercial gate installation?
Yes. We handle commercial access-control gates with commercial-grade operators like FAAC, BFT, and DoorKing, plus the loop detectors and access controls a business entrance needs. Pricing runs higher than residential because of duty cycle and device count. Call (855) 251-3899 for a commercial estimate.
What does “free estimate” actually cover?
It covers an on-site look at your gate location, power, slope, and goals, followed by a written price for the job. The estimate is free and the price is set per job by that written estimate. Call (855) 251-3899 to schedule.
Why a Gate Specialist for Your Hillsboro Installation
Installation is the easy part to get wrong. A gate set on the wrong footing, an operator sized to the wrong gate weight, or sensors placed so they don’t actually protect the swing path all show up months later as repairs. We specialize exclusively in gate systems – manual repair, electric gate repair, and new gate installation – so the same team that installs also understands the control boards, operators, and safety reversals behind the automation.
Our technicians have up to 8 years of experience, and we service virtually every major automated gate brand on the market. That brand fluency means accurate diagnosis and no trial-and-error parts swapping. We work with homeowners and property managers alike, from a single residential driveway to a commercial access-control entrance. If you’re weighing a new gate against repairing what you have, see our guide to gate repair in Hillsboro for how the two compare, or call and we’ll talk it through.
Get a Free Gate Installation Estimate in Hillsboro
If you’re planning a new gate in Hillsboro, the fastest way to get a real number is a free on-site estimate. Call (855) 251-3899. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. We’ll look at your driveway, your power, and your goals, then put a written price in front of you – no guessing, no pressure. Gates are all we do, and that’s exactly why the estimate is worth getting.
Pricing reflects the Hillsboro market as of 2026. Gate Repair Hillsboro offers free estimates – call (855) 251-3899.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Leela Reddy"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Amanda Bennett"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Jennifer Gallagher