Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Cornelius, OR
If you need gate work in Cornelius, we do one thing: gates. New gate installation, manual gate repair, and electric gate repair for the automated systems that run driveways, farm entrances and small commercial access points. Cornelius is the kind of town where that matters more than it does in most suburbs. Older homes near downtown, newer subdivisions on the edges, and rural-residential parcels with long gravel driveways and outbuildings all sit together on the same wet valley floor, which means the gate at the end of a Cornelius driveway takes more punishment than a standard fence gate ever will. Call (855) 251-3899 and we’ll give you a free estimate.
Why Cornelius Homes Are Different
Cornelius sits in the Tualatin Valley, and the ground here does most of the damage. The soils are heavy clay, and the valley swings between soaking winters and dry summers. In the wet months, ground stays soft and muddy for long stretches, so posts work loose and hinges slowly sag out of line. By August, wooden gates that were tight in February have swollen, warped or pulled at their latches. That pattern repeats, and it’s why we see so many alignment problems on Cornelius gates that have nothing to do with a broken part.
The housing mix reinforces it. Older small-town homes close to downtown often have narrow driveways and pedestrian gates, while the rural-residential properties on the outside of town have much longer driveways, farm-style entrances and gates that double as livestock or equipment barriers. Those gates carry heavier loads and settle unevenly from farm traffic and winter mud. Newer subdivisions bring their own set of issues: automated operators, loop detectors, safety edges, and the control wiring that makes them work. A Cornelius gate repair can involve a sagging hinge or a control board, and we handle both.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Cornelius Services
Two jobs bring most Cornelius homeowners and property managers to us: getting a failing gate working again, and getting the electric operator behind it diagnosed and repaired.
Gate Repair in Cornelius
Manual gate repair in Cornelius usually starts with the ground. Sagging hinges, dragging gates, latches that no longer meet and posts that have leaned over several wet seasons are the common calls, and heavy clay soil plus winter mud is behind most of them. We look at the post footing, the hinge condition and the gate frame before we touch anything, because a hardware swap on a shifting post will fail again by the next rain. Farm-style entrances around Cornelius need heavier-duty hardware and a check on uneven settling. If your gate is dragging, sticking or won’t stay shut, Gate Repair in Cornelius covers what we do and how we price it.
Electric Gate Repair in Cornelius
Automated gates need a different diagnostic approach than a manual one. If your operator runs but the gate stalls, reverses for no reason, opens halfway or stops responding to a remote, the fault can sit in the control board, the loop detector, the safety reversal edge, the limit settings or the power run to the operator. We work on the electric side of gate systems as a specialty, not as an afterthought, which means we test the operator and the safety devices instead of guessing. Cornelius systems with long driveway runs and buried wiring get extra attention on the power side. For operator and control work, see Electric Gate Repair in Cornelius.
Gate Installation in Cornelius
Gate Installation in Cornelius tends to be a different job than most people expect, because so many properties here aren’t standard suburban lots. Long driveways, rural-residential parcels and farm-style entrances are common, and clay soil with wet winters means the footing and alignment work matters as much as the gate itself. We measure the opening, match the gate and operator to the property, and handle the full Gate Installation from the post footing through to the finished hardware. Automated driveway gates, sliding gates and pedestrian gates all come through the same process, and the price is written down and agreed before anything is ordered or dug.
Automatic Gate Installation
Signs you need it
You’re tired of opening a long driveway gate by hand, or your current manual gate is too heavy to swing comfortably and you want it powered.
What it costs in Cornelius
Automatic gate installation in Cornelius typically runs $3,200 to $7,500 depending on gate size, operator choice and the power run to the unit, and the written estimate sets the final price.
How we do it
We measure the opening and confirm the swing or slide direction, set the posts to proper footing depth, mount the gate and operator, wire the controls and safety devices, then test travel limits, reversal and remote range before we consider it finished.
Driveway Gate Installation
Signs you need it
Your driveway is long, open to the road, or carries equipment and livestock, and the existing entrance gate is undersized, damaged or missing altogether.
What it costs in Cornelius
Driveway gate installation typically falls between $2,800 and $6,500 in Cornelius, and heavier farm-style entrances sit at the upper end of that range.
How we do it
We survey the driveway grade and surface, size the gate and posts for the load it will carry, set footings to proper depth, hang the gate and check it swings or rolls true across the full width.
What Gate Installation Costs in Cornelius
| Item | Typical range in Cornelius |
|---|---|
| Automatic gate installation | $3,200 – $7,500 |
| Driveway gate installation | $2,800 – $6,500 |
| Gate operator and safety device wiring | $600 – $2,200 |
Do I need a permit for a new gate in Cornelius?
Most Cornelius gate installations that involve new posts, footings or electrical work need a permit. Ask the city’s building department before work starts, and mention any HOA covenants on driveway entrances. We’ll walk through what the job involves so you know what to raise with them.
Should I power a driveway gate or keep it manual?
Power it if the gate is long, heavy, on a slope or used daily. Manual suits short pedestrian-style gates. For the long driveway entrances common to rural-residential Cornelius properties, an automated operator with proper safety edges is usually the right call. Call (855) 251-3899 for a free on-site estimate.
Brands We Service in Cornelius
We service nine leading gate brands, including Ghost Controls, DoorKing, Elite and Mighty Mule. That range covers entry-level residential operators and commercial-grade systems on the same visit list, so diagnosing your gate doesn’t turn into trial-and-error parts swapping. We don’t stock parts locally; once the fault is identified we source what’s needed and get back to you with a clear timeline. Read more about our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Cornelius, OR
| Service | Typical range in Cornelius |
|---|---|
| Gate repair (hinges, latches, alignment) | $150 – $450 |
| Gate post reset or replacement | $250 – $700 |
| Electric gate operator diagnosis and repair | $200 – $650 |
| Control board replacement | $300 – $800 |
| Safety edge or loop detector repair | $180 – $550 |
| Automatic gate installation | $3,200 – $7,500 |
| Driveway gate installation | $2,800 – $6,500 |
| Gate operator and safety device wiring | $600 – $2,200 |
Price in Cornelius climbs with gate weight and width, footing complications in clay soil, and the distance from the operator to the power source. What never changes is the process: you get a quoted price agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Cornelius
We work across Cornelius and the surrounding rural-residential pockets, and response across the town is quick given how compact it is. Whether you’re on a subdivision lot or a long gravel driveway outside the core, we can usually get a technician out the same day for repair calls, with fast dispatch from 7am to 7pm. Tell us the address and what the gate is doing when you call, and we’ll bring the right test equipment.
- Downtown Cornelius
- Rural-residential properties off the town edges
- Subdivisions near 97113
- Farm and small-acreage entrances along gravel driveways
Service Area – Cities Near Cornelius
Cornelius sits close to the rest of the Tualatin Valley, and we cover the surrounding cities without a handoff to another contractor. If you’re just outside town, we can usually reach you on the same trip. We serve Hillsboro, OR, Forest Grove, OR, Aloha, OR and Sherwood, OR, plus the rural roads connecting them. Call (855) 251-3899 and tell us where you are. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Cornelius, OR – Our Local Coverage Area
We serve Cornelius and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cornelius
For most repair calls in Cornelius we can get a technician out the same day. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 251-3899 and tell us what the gate is doing.
Often yes. New posts, footings or electrical work for an automated gate typically need a permit from the city’s building department, and HOA covenants can restrict gate height, style or placement. Check both before work starts. We’ll give you the specifics of the job so you know exactly what to ask about.
Yes. We work across Cornelius and the rural-residential properties around it, including farm-style entrances and long gravel driveways where the gate carries heavier loads and settles unevenly. Call (855) 251-3899 with the address and we’ll confirm coverage and timing.
If your gate is failing, sticking or needs automating, call us at (855) 251-3899 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Gates are all we do, and we’ll give you a straight answer on what’s wrong and what it takes to fix it.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Cornelius Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Steve Walsh"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Danielle Anderson"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Leela Reddy